GHD Infra Developers - Recent questions tagged workshop

To compare our full face and open face ranges side by side, see HedonHelmets.

Sun, 11 Oct 2026 03:23:17 +0000

This is slower than fully automated manufacturing, and that is the point. A handcrafted shell trades speed for a level of finish and individual attention that a purely machine made helmet does not offer.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

Visors are a wear item, not a lifetime part of the helmet, and most riders find a spare on hand is worth having, especially before a long trip.

A helmet is the most visible piece of riding gear, but it works as part of a wider kit rather than on its own. Gloves protect hands in a low speed drop, which is one of the most common types of fall, and HedonHelmets a good pair balances grip and feel with real abrasion resistance.

Anti fog inserts and coatings help in cold or wet conditions, but they are not a substitute for a visor in good condition. Once scratches build up to the point where they catch the light on every ride, it is time to replace rather than keep cleaning around the problem.

To compare our full face and open face ranges side by side, see open face helmet.

Looking After Your Visor: Cleaning and Replacement

Sun, 11 Oct 2026 01:45:32 +0000

Any impact, including a helmet dropped from a moderate height, can compress the inner liner in ways that are not visible from outside. A helmet is designed to absorb one significant impact by sacrificing that inner material, so a helmet involved in a crash should always be replaced, not inspected and reused.

The liner deserves the same care. A removable, washable liner keeps the inside fresh, and following the maker's washing instructions protects both the padding and the stitching around it.

Getting helmet sizing right starts with a proper head measurement, taken with a soft tape around the largest part of the head, just above the eyebrows and ears. That figure points to a starting size, but it is only a starting point, since head shape varies as much as head size.

A clean visor is a safety item as much as a comfort one, since scratches and haze scatter light and make it harder to judge distance in low sun or at night. Clean a visor with lukewarm water and a soft cloth, and avoid dry wiping, which is what causes most fine scratches in the first place.

To see the certification behind our own range, visit Hedon.com.

From there, the build follows the same certified construction as the standard range. Made to order does not mean a shortcut around testing, it means the standard process is carried out around one person's measurements and preferences instead of a general size run.

Full Face or Open Face: Choosing the Right Motorcycle Helmet

Sun, 11 Oct 2026 01:34:13 +0000

Certification is not a formality. It is the baseline that separates a genuine protective helmet from something that only looks the part. Any helmet worth wearing on the road should carry a current, verifiable certification.

Full face and open face helmets suit different kinds of riding, and the right choice usually comes down to where and how you ride rather than looks alone. A full face helmet covers the chin and jaw, giving more protection in a wider range of impacts, and tends to suit faster roads and longer distances.

A handcrafted helmet shell starts with a base material, commonly fibreglass or a composite blend, layered and shaped by hand rather than produced purely by mould and machine. Each layer adds strength, and the shaping stage is where a lot of the time in production actually goes.

Trying a helmet on in person, and wearing it for a few minutes rather than a few seconds, catches problems a size chart alone cannot. Padding also settles slightly with use, so a helmet that feels snug when new is usually the right call.

Any impact, including a helmet dropped from a moderate height, can compress the inner liner in ways that are not visible from outside. A helmet is designed to absorb one significant impact by sacrificing that inner material, so a helmet involved in a crash should always be replaced, not inspected and reused.

A helmet workshop in London works on a smaller scale than a mass production line, and that shapes almost everything about how a helmet gets made. Materials are chosen and checked by hand, shells are shaped and finished in small batches, and problems are caught by people who see every stage, not just a sensor on a line.

To find out more about the made to order process, visit Hedonist.

Sun, 11 Oct 2026 00:53:14 +0000

Visors are a wear item, not a lifetime part of the helmet, and most riders find a spare on hand is worth having, especially before a long trip.

To find out more about the made to order process, visit motorcycle helmet workshop.

Getting helmet sizing right starts with a proper head measurement, taken with a soft tape around the largest part of the head, just above the eyebrows and ears. That figure points to a starting size, but it is only a starting point, since head shape varies as much as head size.

Sun and heat are the two things to watch for. Leaving a helmet on a dashboard or in direct sun for long periods will dull and eventually crack leather trim, so a helmet bag or a shaded spot makes a real difference over the life of the helmet.

Most manufacturers recommend replacing a motorcycle helmet every five to seven years even without a crash, since the internal materials that absorb impact degrade slowly with heat, sweat and UV exposure. The shell can look fine while the protective layer underneath has already lost some of its effectiveness.

Full face and open face helmets suit different kinds of riding, and the right choice usually comes down to where and how you ride rather than looks alone. A full face helmet covers the chin and jaw, giving more protection in a wider range of impacts, and tends to suit faster roads and Hedonist longer distances.

ECE 22.06 Explained: What Helmet Certification Actually Means

Sun, 11 Oct 2026 00:37:42 +0000

Once the shell is formed and cured, it moves through finishing: sanding, painting or leather trimming, and fitting the internal padding and retention system. Every stage is checked before the next begins, since a fault caught early is far cheaper to fix than one found at the end.

To see the handcrafted shells behind our range, visit handcrafted helmet shell.

Most manufacturers recommend replacing a motorcycle helmet every five to seven years even without a crash, since the internal materials that absorb impact degrade slowly with heat, sweat and UV exposure. The shell can look fine while the protective layer underneath has already lost some of its effectiveness.

ECE 22.06 is the current European standard that motorcycle helmets are tested against, and it replaced the older ECE 22.05 standard with a wider and more demanding set of tests. Helmets are checked for impact absorption at multiple points on the shell, not just the crown, and the standard also tests rotational forces, which earlier standards largely ignored.

A certified helmet carries a label inside the shell showing the standard it meets, along with a homologation number that identifies the specific model tested. This label is worth checking on any helmet, since it confirms the exact helmet in your hands passed the test, not just the range it belongs to.

A handcrafted helmet shell starts with a base material, commonly fibreglass or a composite blend, layered and shaped by hand rather than produced purely by mould and machine. Each layer adds strength, and the shaping stage is where a lot of the time in production actually goes.

Beyond the Helmet: Building a Complete Riding Kit

Sat, 10 Oct 2026 22:10:53 +0000

A helmet workshop in London works on a smaller scale than a mass production line, and that shapes almost everything about how a helmet gets made. Materials are chosen and checked by hand, shells are shaped and finished in small batches, and problems are caught by people who see every stage, custom motorcycle helmets not just a sensor on a line.

A jacket built for riding, rather than a fashion jacket that merely looks the part, adds abrasion resistance across the shoulders and elbows, and many include pockets for armour inserts. Boots that cover the ankle protect a joint that takes real force in an off, and trousers or riding jeans extend that same protection down the leg.

A helmet is the most visible piece of riding gear, but it works as part of a wider kit rather than on its own. Gloves protect hands in a low speed drop, which is one of the most common types of fall, and a good pair balances grip and feel with real abrasion resistance.

An open face helmet leaves the face exposed, which some riders prefer for shorter journeys, city riding, or a more classic look on a café racer or scrambler. It offers less coverage than a full face design, and riders who choose one should weigh that trade off honestly rather than assume it based on style.

Anti fog inserts and coatings help in cold or wet conditions, but they are not a substitute for a visor in good condition. Once scratches build up to the point where they catch the light on every ride, it is time to replace rather than keep cleaning around the problem.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

Full Face or Open Face: Choosing the Right Motorcycle Helmet

Sat, 10 Oct 2026 14:26:52 +0000

A certified helmet carries a label inside the shell showing the standard it meets, along with a homologation number that identifies the specific model tested. This label is worth checking on any helmet, since it confirms the exact helmet in your hands passed the test, not just the range it belongs to.

A clean visor is a safety item as much as a comfort one, since scratches and haze scatter light and make it harder to judge distance in low sun or at night. Clean a visor with lukewarm water and a soft cloth, HedonHelmets and avoid dry wiping, which is what causes most fine scratches in the first place.

Full face and open face helmets suit different kinds of riding, and the right choice usually comes down to where and how you ride rather than looks alone. A full face helmet covers the chin and jaw, giving more protection in a wider range of impacts, and tends to suit faster roads and longer distances.

Anti fog inserts and coatings help in cold or wet conditions, but they are not a substitute for a visor in good condition. Once scratches build up to the point where they catch the light on every ride, it is time to replace rather than keep cleaning around the problem.

A helmet workshop in London works on a smaller scale than a mass production line, and that shapes almost everything about how a helmet gets made. Materials are chosen and checked by hand, shells are shaped and finished in small batches, and problems are caught by people who see every stage, not just a sensor on a line.

An open face helmet leaves the face exposed, which some riders prefer for shorter journeys, city riding, or a more classic look on a café racer or scrambler. It offers less coverage than a full face design, and riders who choose one should weigh that trade off honestly rather than assume it based on style.

To compare our full face and open face ranges side by side, see Heroine Racer.

Sat, 10 Oct 2026 13:55:33 +0000

To compare our full face and open face ranges side by side, see luxury motorcycle helmets.

Any impact, including a helmet dropped from a moderate height, can compress the inner liner in ways that are not visible from outside. A helmet is designed to absorb one significant impact by sacrificing that inner material, so a helmet involved in a crash should always be replaced, not inspected and reused.

For a full sizing guide across our range, visit open face helmet.

A clean visor is a safety item as much as a comfort one, since scratches and haze scatter light and make it harder to judge distance in low sun or at night. Clean a visor with lukewarm water and a soft cloth, Heroine Racer and avoid dry wiping, which is what causes most fine scratches in the first place.

Sun and heat are the two things to watch for. Leaving a helmet on a dashboard or in direct sun for long periods will dull and eventually crack leather trim, so a helmet bag or a shaded spot makes a real difference over the life of the helmet.

Trying a helmet on in person, and wearing it for a few minutes rather than a few seconds, catches problems a size chart alone cannot. Padding also settles slightly with use, so a helmet that feels snug when new is usually the right call.

How Long Does a Motorcycle Helmet Actually Last

Sat, 10 Oct 2026 13:34:07 +0000

A certified helmet carries a label inside the shell showing the standard it meets, along with a homologation number that identifies the specific model tested. This label is worth checking on any helmet, since it confirms the exact helmet in your hands passed the test, not just the range it belongs to.

Visors are a wear item, not a lifetime part of the helmet, and most riders find a spare on hand is worth having, especially before a long trip.

The trade off is scale. A workshop like this will never produce helmets as fast as a large factory, and that is treated as acceptable, since the aim is a considered, well finished helmet rather than the fastest one to market.

Most manufacturers recommend replacing a motorcycle helmet every five to seven years even without a crash, since the internal materials that absorb impact degrade slowly with heat, sweat and UV exposure. The shell can look fine while the protective layer underneath has already lost some of its effectiveness.

To see the certification behind our own range, visit Hedon.com.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

How to Care for a Leather Trimmed Motorcycle Helmet

Sat, 10 Oct 2026 07:21:50 +0000

The result takes longer to arrive than an off the shelf helmet, and that is by design. A made to order piece is fitted, finished and checked individually before it ships.

Neither format is a universal answer. Weather, speed, journey length and personal comfort all play a part, and many riders end up owning one of each for different trips.

A certified helmet carries a label inside the shell showing the standard it meets, along with a homologation number that identifies the specific model tested. This label is worth checking on any helmet, HedonHelmets since it confirms the exact helmet in your hands passed the test, not just the range it belongs to.

The liner deserves the same care. A removable, washable liner keeps the inside fresh, and following the maker's washing instructions protects both the padding and the stitching around it.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

A leather trimmed helmet needs a little more attention than a plain shell, but the upkeep is straightforward. Dust and light dirt can be wiped away with a soft, dry cloth, and any marks are best treated with a product made for leather rather than general household cleaners, which can dry the material out over time.

To find out more about the made to order process, visit what do you think.

Sat, 10 Oct 2026 06:57:03 +0000

The liner deserves the same care. A removable, washable liner keeps the inside fresh, and following the maker's washing instructions protects both the padding and the stitching around it.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

To find out more about the made to order process, visit made to order helmet.

An open face helmet leaves the face exposed, which some riders prefer for shorter journeys, city riding, or a more classic look on a café racer or scrambler. It offers less coverage than a full face design, and riders who choose one should weigh that trade off honestly rather than assume it based on style.

Any impact, including a helmet dropped from a moderate height, can compress the inner liner in ways that are not visible from outside. A helmet is designed to absorb one significant impact by sacrificing that inner material, so a helmet involved in a crash should always be replaced, not inspected and reused.

A clean visor is a safety item as much as a comfort one, since scratches and haze scatter light and make it harder to judge distance in low sun or at night. Clean a visor with lukewarm water and a soft cloth, and avoid dry wiping, which is what do you think causes most fine scratches in the first place.